1 Mitutoyo Bright 504 CNC Coordinate Measuring Machine
1 14" OGP Basic Bench Contour Projector with edge sensing technology
3 Mitutoyo "Surf-Test 301" Profilometer

1 36" x 72" Granite Inspection Plate (Grade A)
3 24" x 36" Granite Inspection Plate (Grade A)
1 9" x 9" x 9" Granite 90º Degree Angle Plate
3 Shop Grade Granite Inspection Plates
7 Granite Plates with Drop Indicators

1 Mitutoyo 12" Height Master
1 Mitutoyo 18" Digit-Matic Height Gage
2 Mitutoyo 12" Digit-Matic Height Gage
5 Mitutoyo 12" Height Gage

1 Wilson Hardness Tester

3 Bausch & Lomb Stereo Zoom Microscope (20x to 40x)
1 Nikon Microscope (20x - 40x)
4 View Stereo Microscope
1 9 pc. set of Calibration Quality Gage Blocks
2 80 pc. set of Gage Blocks
2 Sets of Gage Pins .011" - .500" (in .001" increments)
1 24" Set of Bench Centers
1 Gar Air Gage (inspect diameters to .00002")
1 Dial Bore Gages .145" - 6.00" (inspect to .0001")
1.5 - 1.2" Mitutoyo Borematic (Inspect to .0005)
1 Thread Gages and Deltronic Pins as required
1 Mueller Gage for inspecting inside Grooves .180 - 6" diameter (to .0005")
1 Outside Micrometers through 18"
1 Calipers through 40"
1 ID Groove Indicators from .180 diameter
Specialty Micrometers:
1 Etalon 1" Indicator Micrometer (inspect to .00005")
3/4" - 3" 3-Point Hole Micrometers
0 - 3" Thread Pitch Micrometers
0 - 2" Mitutoyo "Uni-Mike" Interchangeable Anvil Micrometers
0 - 3" Blade Micrometers
0 - 14" depth Micrometers (including Mitutoyo Digi-Matic)
0 - 12" Inside Micrometers
ID Groove Width Micrometer
0 - 1" Disc Micrometer